Skip to main content

Walkera F210 Racing Drone Install Camera Holder For Carry 4K camera

Walkera F210 Racing Drone Install Camera Holder For Carry 4K camera(support Gopro & 808 camera), help the raceing quadcopter to achieve 4K HD shooting, recording every wonderful moment of flight.

Let's Find out how to install the Walkera F210 camera holder

1. First we look at the whole picture of the camera holder

2. The camera holder stuck in front of aircraft battery fixed plate, then locked screw

3. Below is old battery fixing plate, only one screw holes on the side 

4. New battery fixing plate, you can purchase it

5. There are shock absorber on the camera holder, ensure better quality of shooting, the camera holder can adjust the camera's angle, to meet different user requirements for shooting angle.

Materials needed:
a. battery holder (F210-Z-10) more than two holes.
b. The camera holder (with 4 shock absorber ball), and the frame can be rotated
c. Ties
d. two screws
e. Camera

It's very simple, just the camera holder is inserted into the hole of the battery holder (F210-Z-10), then fixed with screws, the camera fixed with cable ties, then it's completed, It's that simple! 

If you are enthusiast of racing, you will love this Walkera F210 Racing Drone Quadcopter, if you thinking of buy it, check it @+GeekBuying from here 

More racing quadcopter models, visite here


  1. Nice blog! I read your article. I really like all the points that you mentioned are interesting and helpful. Thank you for sharing this blog.

    Drone With Hd Camera


Post a Comment

Popular posts from this blog

How To Extend Hubsan X4 H501S Remote Control Distance?

Hubsan X4 501S is a cost-effective small drone quadcopter, but image transmission distance just about 300 meters, if you want extend the transmission distance, it's easy, even no necessary change the antenna, just follow these 3 steps: 
1. As shown below image, original antenna head is inward direction, put this antenna to get down, let it outward, and as far as possible by remote control edge

2. Like following image, 5.8g receiver original is mounted to the inside, to make it as close to the front, near the remote edges, and pouring sealant.

3. As shown below: separated in the middle with aluminum foil, then gumming, remember higher a little, the back cover just to suppress.

Thus, modification is completed, should be noted that, 2.4G inclined 45 degrees to install, 5.8g flat antenna, please try to tilt outward or parallel with the housing, this can be slightly adjusted by the test. 
Upon completion, re-frequency remote control and aircraft: Press the camera button, open the remo…

Zerotech Hunter Leaked, Looks Like DJI Mavic

Some photos of Zerotech new product, the Hunter, have been leaked, come with folding arm design, very compact size, it is slightly smaller than DJI's first folding drone MAVIC. The battery compartment occupies a large part of the body space, it speculated that duration should be relatively dobby's seven minutes have greatly improved.

With an insider revealed the aircraft life time up to 15 minutes +, and the image transmission distance of up to 1.5KM +

But unfortunately, there is no positive picture of the aircraft, whether equipped with mechanical three-axis gimbal is not known. In order to save costs, still use electronic stability is also possible. This mini folding muotirotor will be a strong competitor to DJI MAVIC,  please stay tuned.

Zerotech Dobby Usage Guidelines: How To Download Dobby APP & Charging The Battery

Zerotech Dobby Pocket Selfie Drone now available for sale @ , but cause currently the manual is only in Chinese, so in order to let everyone more convenient to use DOBBY pocket drones, I will be launched Zerotech Dobby English Usage Guidelines in here, hope it's helpful for Zerotech Dobby Fans. Today let's talk about how to download app and charging the battery.
Do.Fun  APP
Do.Fun is ZEROTECH launched a UAV flight control software, DOBBY pocket drone flight control etc. need to control through the APP.